Záloha metadat/Kychot/šuplík/kernel

Záloha metadat/Kychot/šuplík/kernel

Jak vidí disk jádro = hlášky kernelu, adresář /proc aj.

/var/log/kern.log

Hlášky při zasunutí šuplíku:

kernel: ata1: port is slow to respond, please be patient (Status 0xff)
kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
kernel: ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
kernel: ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/1)
kernel: ata1.00: configured for UDMA/100
kernel: ata1: EH complete
kernel: scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5
kernel: sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
kernel: sd 0:0:0:0: [sda] Write Protect is off
kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kernel: sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
kernel: sd 0:0:0:0: [sda] Write Protect is off
kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kernel:  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
kernel: sd 0:0:0:0: [sda] Attached SCSI disk

Ty samé hlášky najdeme po bootu systému ve výpisu přikazu dmesg

/proc

• /proc/scsi/scsi

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: WDC WD3200KS-00P Rev: 21.0
  Type:   Direct-Access                    ANSI  SCSI revision: 05