WiFi/adaptér/USB/TL-WN7200ND

< WiFi‎ | adaptér‎ | USB

TL-WN7200ND je WiFi USB adaptér od firmy TP-LINK.

Výrobce

editovat

Website: http://www.tp-link.com

Parametry

editovat
  • pásmo 2.4 – 2.4835 GHz
  • protokol IEEE 802.11b/g/n
  • rychlost přenosu až 150 Mb/s
  • výstupní výkon až 500mW
  • WPS
  • odpojitelná anténa 5dBi
  • Citlivost přijímače:
    • -68dBm pro rychlost 135 Mbps v protokolu 802.11n
    • -76dBm pro 54 Mbps v protokolu 802.11g
  • podpora 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) šifrování.
  • adaptér je vybavený tlačítkem QSS

Uživatelé

editovat

Kdo všechno si ho koupil a jaké s ním má zkušenosti:

  • 2011-05-17 Kychot v CZC za 349.20 Kč vč. DPH + 5m 50Ohm anténní kabel za 66,- Kč vč. DPH
    • EPROM version 1.0
    • Firmware Version 0.23
    • Phy_Address F4-EC-38-89-FA-02
    • Win - modré instalační miniCD:
P/N: CD104A1		
Version: 1.0		
Date: 2010-12-17
- First release.
      • Utility Version 2.1.6.0 Date 2010-07-30
      • Driver Version 3.1.3.0 Date 2010-05-27


  • 2012-07-30 v Mironetu za 442,- Kč vč. DPH
P/N: CD104A1		
Version: 1.0		
Date: 2010-12-17
- First release.
  • chip: RT2870/RT3070

Chodí okamžitě po připojení - bez problému.

Odkazy:


  1. připojím přiloženou prutovou anténu
  2. spustím v rootovském terminálu:
cd /var/log
tail -f kern.log
  1. připojím adaptér přes USB
  2. rozsvítí se zelená LED na adaptéru a pak začne v nepravidelných intervalech blikat
  3. výpis hlášek jádra:
May 18 06:54:56 mi kernel: [90846.620108] usb 1-1: new high speed USB device using ehci_hcd and address 14
May 18 06:54:57 mi kernel: [90846.998235] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
May 18 06:54:57 mi kernel: [90847.022227] rtusb init --->
May 18 06:54:57 mi kernel: [90847.024007] === pAd = faf91000, size = 472668 ===
May 18 06:54:57 mi kernel: [90847.024090] <-- RTMPAllocAdapterBlock, Status=0
May 18 06:54:57 mi kernel: [90847.031426] usbcore: registered new interface driver rt2870
May 18 06:54:57 mi kernel: [90847.811140] <-- RTMPAllocTxRxRingMemory, Status=0
May 18 06:54:57 mi kernel: [90847.819119] -->RTUSBVenderReset
May 18 06:54:57 mi kernel: [90847.819245] <--RTUSBVenderReset
May 18 06:54:58 mi kernel: [90848.144257] 1. Phy Mode = 0
May 18 06:54:58 mi kernel: [90848.144270] 2. Phy Mode = 0
May 18 06:54:58 mi kernel: [90848.144281] NVM is Efuse and its size =2d[2d0-2fc] 
May 18 06:54:58 mi kernel: [90848.215886] RTMPSetPhyMode: channel is out of range, use first channel=1 
May 18 06:54:58 mi kernel: [90848.235016] 3. Phy Mode = 0
May 18 06:54:58 mi kernel: [90848.245513] MCS Set = 00 00 00 00 00
May 18 06:54:58 mi kernel: [90848.341655] <==== rt28xx_init, Status=0
May 18 06:54:58 mi kernel: [90848.343390] 0x1300 = 00073200
May 18 06:54:58 mi kernel: [90848.633064] ---> RTMPFreeTxRxRingMemory
May 18 06:54:58 mi kernel: [90848.633162] <--- RTMPFreeTxRxRingMemory
May 18 06:54:59 mi kernel: [90848.949391] <-- RTMPAllocTxRxRingMemory, Status=0
May 18 06:54:59 mi kernel: [90848.951492] -->RTUSBVenderReset
May 18 06:54:59 mi kernel: [90848.951615] <--RTUSBVenderReset
May 18 06:54:59 mi kernel: [90849.274751] 1. Phy Mode = 0
May 18 06:54:59 mi kernel: [90849.274764] 2. Phy Mode = 0
May 18 06:54:59 mi kernel: [90849.274775] NVM is Efuse and its size =2d[2d0-2fc] 
May 18 06:54:59 mi kernel: [90849.367126] 3. Phy Mode = 0
May 18 06:54:59 mi kernel: [90849.377144] MCS Set = 00 00 00 00 00
May 18 06:54:59 mi kernel: [90849.479134] <==== rt28xx_init, Status=0
May 18 06:54:59 mi kernel: [90849.481123] 0x1300 = 00073200
May 18 06:55:04 mi kernel: [90854.533887] ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1727
May 18 06:55:09 mi kernel: [90859.656069] wlan1: no IPv6 routers present
May 18 06:55:25 mi kernel: [90874.944838] ===>rt_ioctl_giwscan. 24(24) BSS returned, data->length = 3323
May 18 06:55:30 mi kernel: [90880.261446] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 2156
May 18 06:55:40 mi kernel: [90890.272476] ===>rt_ioctl_giwscan. 20(20) BSS returned, data->length = 2586
May 18 06:55:50 mi kernel: [90900.281759] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 2201
May 18 06:56:00 mi kernel: [90910.285099] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1827
May 18 06:56:10 mi kernel: [90920.293387] ===>rt_ioctl_giwscan. 19(19) BSS returned, data->length = 2452
May 18 06:56:19 mi kernel: [90929.206871] Err;FC.ToDs
May 18 06:56:20 mi kernel: [90930.301504] ===>rt_ioctl_giwscan. 19(19) BSS returned, data->length = 2452
May 18 06:56:30 mi kernel: [90940.308174] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 2181
May 18 06:57:19 mi kernel: [90989.209965] Err;FC.ToDs
  1. Vyskočilo mi okénko: K bezdrátové síti je vyžadováno ověření (na eduroam). Vyplním přihlašovací údaje
May 18 06:58:48 mi kernel: [91078.596039] #
May 18 06:59:05 mi kernel: [91095.908288] ===>rt_ioctl_giwscan. 20(20) BSS returned, data->length = 2597
May 18 06:59:15 mi kernel: [91105.917695] ===>rt_ioctl_giwscan. 20(20) BSS returned, data->length = 2597
May 18 06:59:25 mi kernel: [91115.928686] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 2365
May 18 06:59:36 mi kernel: [91125.935304] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 2331
May 18 06:59:46 mi kernel: [91135.940737] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 2344
May 18 06:59:56 mi kernel: [91145.949280] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 2322
May 18 07:00:19 mi kernel: [91169.221721] Err;FC.ToDs
  1. Kliknu na síťový applet, že chci navázat spojení s domácí WiFi
May 18 07:01:51 mi kernel: [91261.280840] ---> RTMPFreeTxRxRingMemory
May 18 07:01:51 mi kernel: [91261.280927] <--- RTMPFreeTxRxRingMemory
May 18 07:01:51 mi kernel: [91261.605207] <-- RTMPAllocTxRxRingMemory, Status=0
May 18 07:01:51 mi kernel: [91261.607657] -->RTUSBVenderReset
May 18 07:01:51 mi kernel: [91261.607779] <--RTUSBVenderReset
May 18 07:01:52 mi kernel: [91262.156646] 1. Phy Mode = 0
May 18 07:01:52 mi kernel: [91262.156655] 2. Phy Mode = 0
May 18 07:01:52 mi kernel: [91262.156663] NVM is Efuse and its size =2d[2d0-2fc] 
May 18 07:01:52 mi kernel: [91262.247638] 3. Phy Mode = 0
May 18 07:01:52 mi kernel: [91262.259400] MCS Set = 00 00 00 00 00
May 18 07:01:52 mi kernel: [91262.356808] <==== rt28xx_init, Status=0
May 18 07:01:52 mi kernel: [91262.358387] 0x1300 = 000a4200
May 18 07:02:03 mi kernel: [91272.944070] wlan1: no IPv6 routers present
May 18 07:02:19 mi kernel: [91289.227667] Err;FC.ToDs
May 18 07:02:26 mi kernel: [91296.141531] ===>rt_ioctl_giwscan. 21(21) BSS returned, data->length = 2685
May 18 07:02:26 mi kernel: [91296.142559] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
May 18 07:03:15 mi kernel: [91344.944823] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 2321
May 18 07:03:55 mi kernel: [91384.942230] ===>rt_ioctl_giwscan. 19(19) BSS returned, data->length = 2452
  1. dostanu odpověď: Spojení navázáno
  2. Kliknu na síťový applet, že chci informace o spojení:
    • Auto eth0 (default); rychlost 100Mb/s
    • Auto domaciwifi; Ovladac: USB; rychlost 54 Mb/s


Problémy

editovat

Android

editovat

S androidem bude asi horší práce to tam nainstalovat.