Uživatel:Kychot/emgdb-proto.pl

#! /usr/bin/perl -w

# emgdb-proto	- příprava protokolů
# v. 0.33
## %breath46 
## oprava inkrementů (sekundy, ne minuty)

use 5.010;

@stim = (
    [],
    [ qw(sole calf HMS paracocc ang_costae m_trapesius)],
    [ qw(sole calf HMS paracocc ang_costae)],
);

sub sec2timestr {               	# převede sekundy na string mm:ss
    my($sec) = @_;
    my $min = int($sec/60);     $sec -= 60*$min;
    sprintf ("%2d:%02d", $min, $sec);
}

sub timestr2sec {			# převede mm:ss na sekundy
    my($min,$sec) = split /:/,@_;
    60*$min+$sec;
}

print "investigation:\t", scalar <>;
print "date:\t\t", scalar <>;
print "person:\t\t", scalar <>;

my $currtime = '~';             # current timepoint; tilde ~ means NULL, i.e. no matter
my $ang_costae = undef;

while (<>) {
    if(/^[A-M0-9]$/){print "letter:\t\t$&\n"; $currtime = '~'; next;}
    if(/.*EXP/)  {print "expfile:\t$&\n";  $currtime = '~'; next;}
    if(/^%(\S+)(\s+(.*))?/) {		 # macro
	my($macro, $value) = ($1, $3);
	print ";$_";		# print original macro as comment line
	given ($macro) {
	    when ('ang_costae') {$ang_costae = $value; print ";ang_costae$value\n";}
	    when ('simons')     {print "~\t     #all amplifier: filter,low =100 [Hz]\n".
                                       "~\t     #all amplifier: filter,high =1 [kHz]\n";}
	    when ('4chLRsc')    {  # Left surface, Left coaxial, Right surface, Right coaxial
		print	"~\t     #1 electrode: surface sin\n".
                        "~\t     #2 electrode: coaxial sin\n".
                        "~\t     #3 electrode: surface dx\n".
                        "~\t     #4 electrode: coaxial dx\n";}
	    when ('4chLRcs')    {  # Left coaxial, Left surface, Right coaxial, Right surface
		print	"~\t     #1 electrode: coaxial sin\n".
                        "~\t     #2 electrode: surface sin\n".
                        "~\t     #3 electrode: coaxial dx\n".
                        "~\t     #4 electrode: surface dx\n";}
	    when ('4chRLcs')    {  # Right coaxial, Right surface, Left coaxial, Left surface
		print	"~\t     #1 electrode: coaxial dx\n".
                        "~\t     #2 electrode: surface dx\n".
                        "~\t     #3 electrode: coaxial sin\n".
                        "~\t     #4 electrode: surface sin\n";}
	    when ('4chcsLR')    {  # Left coaxial, Right coaxial, Left surface, Right surface
		print	"~\t     #1 electrode: coaxial sin\n".
                        "~\t     #2 electrode: coaxial sin\n".
                        "~\t     #3 electrode: surface dx\n".
                        "~\t     #4 electrode: surface dx\n";}
	    default  {die 'Neznámé makro %'.$macro;}
	}
    next;
    }

    if(/^(\d+\:\d+)/) { $currtime = $1; }
    if(/^~/)	      { $currtime = '~'; }	# undef

    if(/^(\d+)\s+(%.*)/){			#  údaj začátku stimulace v celých minutách – časové makro
        my($time, $what) = ($1, $2);
	print ";$_";		                # print original macro as comment line
        if($what =~ /stim(\d+)/){		# začátek stimulace
            my $ps = $1;			# protocol of stimulation
            my $i = 0;
            foreach my $point(@{$stim[$ps]}) {
		if($ang_costae) {$point =~ s/ang_costae/ang_costae$ang_costae/;}
                printf "%02d:00+00:10\tpress: %s sin\n", $time++, $point;
                printf "%02d:00+00:10\tpress: %s dx\n",  $time++, $point;
		$currtime = sprintf "%02d:10", $time;
            }
        }
                                                # u všech cyklů: 0. sekunda nádech
	elsif ($what =~ /breath1\s+(\d+)/) {	# 10s cyklus: 5. sek. výdech
	    my $sec = 60*$time;
	    for(my $i=$1; $i--;) {
		print sec2timestr($sec)   ."+00:05\tbreath: inspir\n";
		print sec2timestr($sec+=5)."+00:05\tbreath: expir\n";
		$sec+=5;
	    }
	}
	elsif ($what =~ /breath8\s+(\d+)/) {	# 15s cyklus: 8. sekunda výdech
	    my $sec = 60*$time;
	    for(my $i=$1; $i--;) {
		print sec2timestr($sec)   ."+00:08\tbreath: inspir\n";
		print sec2timestr($sec+=8)."+00:07\tbreath: expir\n";
		$sec+=7;
	    }
	}
	elsif ($what =~ /breath2\s+(\d+)/) {	# 15s cyklus: 5. sekunda zadržení, 10. sek. výdech
	    my $sec = 60*$time;
	    for(my $i=$1; $i--;) {
		print sec2timestr($sec)   ."+00:05\tbreath: inspir\n";
		print sec2timestr($sec+=5)."+00:05\tbreath: hold\n";
		print sec2timestr($sec+=5)."+00:05\tbreath: expir\n";
		$sec+=5;
	    }
	}
	elsif ($what =~ /breath46\s+(\d+)/) {	# 10s cyklus: 4.sekunda zadržení, 6. sek. výdech
	    my $sec = 60*$time;
	    for(my $i=$1; $i--;) {
		print sec2timestr($sec)   ."+00:04\tbreath: inspir\n";
		print sec2timestr($sec+=4)."+00:02\tbreath: hold\n";
		print sec2timestr($sec+=2)."+00:04\tbreath: expir\n";
		$sec+=4;
	    }
	}
	else {print ";^^^^^^^^DIVNÝ ŘÁDEK($what)^^^^^^^^:\n";}
	next;
    }
    if(/^(\S+)\s+%gain\s+(.*)/) {
	($time, $value) = ($1, $2);
	print "$time\t     ";
	print ( ($value =~ s/(\#\S+) //) ? "$1 " : '#all ');
	print "amplifier: gain =$value [uV/DIV]\n";
	next;
    }

    if (s/^:\s//) {print "$currtime\t";}
    s/ (MB|kHz|Hz|mm|CET|CEST|alg|uV\/DIV)/ [$1]/g;	# jednotky do hranatých závorek
    s/(\d+(.\d+)?) \[MB\]/~$1 [MB]/;          # tildu před hodnotu v MB
    s/ (\d+(:\d+)?) / =$1 /;                    # rovnítko před hodnotu
    print;
}

print @{$stim[0]};